Solenoid Driver KFD2-SLD-Ex2.1545

2-channel isolated barrier
24 V DC supply (bus or loop powered)
Output 45 mA at 15 V DC
Line fault transparency (LFT)
Test pulse immunity
Up to SIL 3 acc. to IEC/EN 61508

Folha de Dados
Documents
CAD+CAE
Approvals+Certificates
Produtos Relacionados

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Folhas de dados: Dados técnicos do KFD2-SLD-Ex2.1545

General specifications
Signal type		Digital Output
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Systematic capability (SC)		SC 3
Supply
Connection		Power Rail or terminals 14+, 15-
Rated voltage		18 ... 30 V DC
Power consumption		max. 3.5 W at 45 mA output current
Input
Connection side		control side
Connection		terminals 7, 8, 9
Test pulse length		max. 2 ms from DO card
Signal level		loop powered 1-signal: 18 ... 30 V DC 0-signal: 0 ... 5 V DC bus powered 1-signal: 15 ... 30 V DC (current limited to 5 mA) 0-signal: 0 ... 5 V DC
Rated current		0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 35 mA (minimum load current DO card)
Inrush current		≤ 200 mA after 100 µs
Output
Connection side		field side
Connection		channel 1: terminals 1+, 2-, 3- channel 2: terminals 4+, 5-, 6-
Internal resistor		approx. 167 Ω
Current		45 mA
Voltage		≥ 15 V
Current limit		45 mA
Open loop voltage		min. 23.6 V
Load		nominal 0.05 ... 20 kΩ
Energized/De-energized delay		≤ 20 ms / ≤ 20 ms
Line fault detection
	Short-circuit	< 30 Ω
	Open-circuit	> 50 kΩ
	Test current	< 500 µA
Galvanic isolation
Input/Output		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Power supply/Output		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V_eff
Indicators/settings
Display elements		LEDs
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2017 , EN IEC 61326-1:2021 (industrial locations) , EN IEC 61326-3-2:2018 For further information see system description.
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F) , both channels configured in the bus powered mode of operation -40 ... 60 °C (-40 ... 140 °F) , all other configurations extended ambient temperature range up to 70 °C (158 °F) for other configurations, refer to manual for necessary mounting conditions
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 150 g
Dimensions		20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
	Height	119 mm
	Width	20 mm
	Depth	115 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		FIDI 21 ATEX 0091 X
	Marking	II 3(1)G Ex ec [ia Ga] IIC T4 Gc II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Output	Ex ia Refer to certificate for alternative parameters.
	Voltage	25.2 V
	Current	52 mA
	Power	850 mW (angular characteristic curve)
	Internal resistance	167 Ω
Supply
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Input
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Collective error message
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, rated insulation voltage 300 V_rms
	Output/power supply	safe electrical isolation acc. to IEC/EN 60079-11, rated insulation voltage 300 V_rms
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012
International approvals
UL approval		E106378
	Control drawing	116-0488
IECEx approval
	IECEx certificate	IECEx FIDI 21.0009X
	IECEx marking	Ex ec [ia Ga] IIC T4 Gc [Ex ia Da] IIIC [Ex ia Ma] I
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210101
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: KFD2-SLD-Ex2.1545

Datasheet: KFD2-SLD-Ex2.1545

Datasheet	Tipo de Arquivo	Tamanho do Arquivo
Datasheet KFD2-SLD-Ex2.1545	PDF	1248 KB
Fiche de données KFD2-SLD-Ex2.1545	PDF	1041 KB
Datenblatt KFD2-SLD-Ex2.1545	PDF	1249 KB
Datasheet KFD2-SLD-Ex2.1545	PDF	1089 KB
Hoja de datos KFD2-SLD-Ex2.1545	PDF	1043 KB

Documents: KFD2-SLD-Ex2.1545

Manuals	Tipo de Arquivo	Tamanho do Arquivo
Manual	PDF	3685 KB
Handbuch	PDF	3693 KB
Instruction manuals
Инструкции	PDF	171 KB
Návod k poużití	PDF	165 KB
Instruktions manual	PDF	164 KB
Instruction manual	PDF	171 KB
Kasutusjuhend	PDF	161 KB
Käyttöohje	PDF	160 KB
Manuel d'instructions	PDF	167 KB
Betriebsanleitung	PDF	172 KB
Οδηγίες χρήσης	PDF	175 KB
Handleiding	PDF	166 KB
Instruction manual / Betriebsanleitung	PDF	163 KB
Használati útmutató	PDF	167 KB
Manuale di istruzioni	PDF	165 KB
Lietošanas pamācība	PDF	165 KB
Instrukciju vadovas	PDF	165 KB
Instrukcja obsługi	PDF	167 KB
Manual de instruções	PDF	166 KB
Manual de utilizare	PDF	166 KB
Návod na poużitie	PDF	166 KB
Navodila za uporabo	PDF	162 KB
Manual de instrucciones	PDF	167 KB
Manual	PDF	162 KB
Technical information
Application Guideline Solenoid Drivers	PDF	734 KB
Anwendungsbeschreibung Ventilsteuerbausteine	PDF	737 KB
Application reports
Application Report - Biological Cleaning of Wastwater and Secondary Sedimentation Stage	PDF	566 KB
Application Report - Energy Generation in Wastwater Treatment Plants	PDF	532 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	PDF	412 KB
Application Report - Sand Trap and Preliminary Sedimentation Stage	PDF	448 KB
Application Report - Screening Systems in Sewage Treatment Plants	PDF	577 KB
Application Report - Sicherer Brennstofftransport in Kohlekraftwerken	PDF	391 KB
Application Report - Water Inlet in Wastewater Treatment Plants	PDF	526 KB
Applikationsbericht - Biologische Abwasserreinigung und Nachklärung	PDF	568 KB
Applikationsbericht - Energiegewinnung in Kläranlagen	PDF	535 KB
Applikationsbericht - Rechenanlagen in Kläranlagen	PDF	578 KB
Applikationsbericht - Sandfang und Vorklärung	PDF	434 KB
Applikationsbericht - Sicherer Brennstofftransport in Kohlekraftwerken	PDF	393 KB
Applikationsbericht - Stromerzeugung in Kohlekraftwerken	PDF	416 KB
Applikationsbericht - Wasserzulauf in Kläranlagen	PDF	527 KB

CAD+CAE: KFD2-SLD-Ex2.1545

CAD	Tipo de Arquivo	Tamanho do Arquivo
CAD 3-D / CAD 3-D	STP	2308 KB
EPLAN
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	EDZ	1273 KB

Approvals+Certificates: KFD2-SLD-Ex2.1545

Certificates	Tipo de Arquivo	Tamanho do Arquivo
China SITIIAS CCC Ex Certificate	PDF	2323 KB
Europe Fiditas ATEX Category 3 (1) G ATEX Category (M1) ATEX Category (1) D	PDF	4154 KB
India PESO (India) CCOE	PDF	106 KB
USA Canada UL Hazardous Location cULus UL E106378	PDF	456 KB
United Kingdom CML UKEX Category (1) D UKEX Category (M1) UK-Type Examination Certificate UKEX Category 3 (1) G	PDF	170 KB
Worldwide Fiditas IECEx Certificate of Conformity	LINK	---
Worldwide TUV Rheinland Functional Safety Certificate	PDF	617 KB
Control Drawings
Control drawing UL / Control drawing UL	PDF	146 KB
Declaration of Conformity
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	PDF	59 KB
ЕС декларация за съответствие	PDF	235 KB
EU prohlášení o shodě	PDF	232 KB
EU-overensstemmelseserklæring	PDF	230 KB
EU-Declaration of conformity	PDF	233 KB
UK-Declaration of conformity	PDF	201 KB
ELi vastavusdeklaratsioon	PDF	230 KB
EU-vaatimustenmukaisuusvakuutus	PDF	230 KB
Déclaration UE de conformité	PDF	231 KB
EU-Konformitätserklärung	PDF	233 KB
EE-Δήλωση συμμόρφωσης	PDF	236 KB
EU-conformiteitsverklaring	PDF	229 KB
EU-Declaration of conformity / EU-Konformitätserklärung	PDF	231 KB
EU megfelelőségi nyilatkozat	PDF	232 KB
Dichiarazione di conformità UE	PDF	229 KB
ES atbilstības deklarācija	PDF	229 KB
ES atitikties deklaracija	PDF	232 KB
Deklaracja zgodności UE	PDF	233 KB
Declaração de conformidade UE	PDF	230 KB
Declaraţia UE de conformitate	PDF	231 KB
EÚ vyhlásenie o zhode	PDF	233 KB
Izjava EU o skladnosti	PDF	229 KB
Declaración de conformidad UE	PDF	229 KB
EU-försäkran om överensstämmelse	PDF	229 KB
AB Uygunluk beyanı	PDF	231 KB

Produtos Relacionados: KFD2-SLD-Ex2.1545

Matching System Components

	KFD2-EB2 Power Feed Module
	Interface for Power Rail, Supply current ≤ 4 A, Replaceable fuse, Relay contact output, reversible, LED status indicationpa

	UPR-03 Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 2 m (6 foot), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-S Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 0.8 m (2.6 ft), simple to customize to application space, Eliminates daisy-chainspa

	UPR-03-M Universal Power Rail
	35 mm DIN mounting rail with 3-conductor insert, Provides DC supply voltage to all equipped K-System modules, Standard length 1.6 m (5 foot), simple to customize to application space, Eliminates daisy-chainspa

	K-DUCT-BU Profile Rail
	Cable trunking is integrated in the mounting profile, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Standard length 1.8 m (5.8 ft), simple to customize to application space, With mounting aidspa

	K-DUCT-BU-UPR-03 Profile Rail
	Cable trunking with integrated Power Rail UPR-03, Safe spacious separation of safe and hazardous signals, No additional cable guides necessary, Provides DC supply voltage to all equipped K-System modules, Standard length 1.8 m (5.8 ft), simple to customize to application space, With end caps UPR-E, cover and mounting aidspa

Accessories

	KF-ST-5GN Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces greenpa

	KF-ST-5BU Terminal Block
	3-pin screw terminal, For KF modules of K-System, Packaging unit: 5 pieces bluepa

	KF-CP Coding Pins
	Coding of K-System terminal blocks, Coding of LB/FB-System front sockets, Packaging unit: 20 x 6 coding pinspa

Notas Gerais sobre as informações de produto da Pepperl+Fuchs

Acesso Rápido

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
phone +55 11 4007 1448

A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.