Inductive sensor NJ5-18GK-SN
- 5 mm flush
- Usable up to SIL 3 acc. to IEC 61508
- Degree of protection IP68
- ATEX-/IECEx-approvals for zone 0/1/20/21 (Ex i)
- ATEX-/IECEx-approvals for zone 2/22 (Ex ec/tc)
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Folhas de dados: Dados técnicos do NJ5-18GK-SN
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NAMUR with safety function | |
| Rated operating distance | 5 mm | |
| Installation | flush | |
| Assured operating distance | 0 ... 4.05 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.85 | |
| Safety Integrity Level (SIL) | up to SIL3 acc. to IEC 61508 Danger! In safety-related applications the sensor must be operated with a qualified fail safe interface from Pepperl+Fuchs, such as KFD2-SH-EX1. Consider the "exida Functional Safety Assessment" document which is available on www.pepperl-fuchs.com as an integral part of this product's documentation. |
|
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | |
| Switching frequency | 0 ... 500 Hz | |
| Current consumption | ||
| Measuring plate not detected | ≥ 3 mA | |
| Measuring plate detected | ≤ 1 mA | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| MTTFd | 11850 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
|
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| IECEx approval | ||
| Equipment protection level Ga | IECEx PTB 11.0092X | |
| Equipment protection level Gb | IECEx PTB 11.0092X | |
| Equipment protection level Gc (ec) | IECEx TUR 21.0017X | |
| Equipment protection level Da | IECEx PTB 11.0092X | |
| Equipment protection level Dc (tc) | IECEx TUR 21.0018X | |
| Equipment protection level Mb | IECEx PTB 11.0092X | |
| ATEX approval | ||
| Equipment protection level Ga | PTB 00 ATEX 2049 X | |
| Equipment protection level Gb | PTB 00 ATEX 2049 X | |
| Equipment protection level Gc (ec) | TÜV 20 ATEX 8523 X | |
| Equipment protection level Da | PTB 00 ATEX 2049 X | |
| Equipment protection level Dc (tc) | TÜV 20 ATEX 8524 X | |
| UL approval | cULus Listed, General Purpose | |
| Ordinary Location | E87056 | |
| Hazardous Location | E501628 | |
| Control drawing | 116-0454 | |
| CCC approval | ||
| Hazardous Location | 2020322315002308 | |
| NEPSI approval | ||
| NEPSI certificate | GYJ16.1392X | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 100 °C (-40 ... 212 °F) | |
| Mechanical specifications | ||
| Connection type | cable | |
| Housing material | Crastin (PBT), black | |
| Sensing face | Crastin (PBT), black | |
| Degree of protection | IP68 | |
| Cable | ||
| Cable diameter | 6 mm ± 0.2 mm | |
| Bending radius | > 10 x cable diameter | |
| Material | silicone | |
| Core cross section | 0.75 mm2 | |
| Length | 2 m | |
| Dimensions | ||
| Length | 39 mm | |
| Diameter | 18 mm | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274101 |
| ECLASS 12.0 | 27274101 |
| ECLASS 11.0 | 27272401 |
| ECLASS 10.0.1 | 27272401 |
| ECLASS 9.0 | 27272401 |
| ECLASS 8.0 | 27272401 |
| ECLASS 5.1 | 27272401 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details: NJ5-18GK-SN
Datasheet: NJ5-18GK-SN
| Datasheet | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|
| Datasheet NJ5-18GK-SN | 745 KB | |
| Datasheet NJ5-18GK-SN | 723 KB | |
| Fiche de données NJ5-18GK-SN | 728 KB | |
| Datenblatt NJ5-18GK-SN | 724 KB | |
| Scheda tecnica NJ5-18GK-SN | 729 KB | |
| Datasheet NJ5-18GK-SN | 776 KB | |
| Folha de dados NJ5-18GK-SN | 728 KB | |
| Hoja de datos NJ5-18GK-SN | 731 KB | |
| Datasheet NJ5-18GK-SN | 732 KB |
Documents: NJ5-18GK-SN
| Instruction manuals | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|
| Инструкции | 208 KB | |
| Návod k poużití | 198 KB | |
| Instruktions manual | 196 KB | |
| Instruction manual | 198 KB | |
| Kasutusjuhend | 190 KB | |
| Käyttöohje | 189 KB | |
| Manuel d'instructions | 203 KB | |
| Betriebsanleitung | 198 KB | |
| Οδηγίες χρήσης | 212 KB | |
| Handleiding | 198 KB | |
| Instruction manual / Betriebsanleitung | 195 KB | |
| Használati útmutató | 201 KB | |
| Manuale di istruzioni | 200 KB | |
| Lietošanas pamācība | 197 KB | |
| Instrukciju vadovas | 198 KB | |
| Instrukcja obsługi | 261 KB | |
| Manual de instruções | 202 KB | |
| Manual de utilizare | 203 KB | |
| Návod na poużitie | 198 KB | |
| Navodila za uporabo | 195 KB | |
| Manual de instrucciones | 203 KB | |
| Manual | 194 KB | |
| Technical information | ||
| Installation conditions | 1054 KB | |
| Einbaubedingungen | 1060 KB |
CAD+CAE: NJ5-18GK-SN
| CAD | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 55 KB |
| CAD Portal / CAD Portal | LINK | --- |
| EPLAN | ||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | LINK | --- |
| EPLAN macro EDZ / EPLAN Makro EDZ | EDZ | 61 KB |
Approvals+Certificates: NJ5-18GK-SN
| Certificates | Tipo de Arquivo | Tamanho do Arquivo |
|---|---|---|
| Canada USA UL Hazardous Location | 412 KB | |
| Canada USA UL Ordinary Location | 1806 KB | |
| China SITIIAS CCC Ex Certificate | 2727 KB | |
| EU PTB ATEX ia 2G, 1G, 1D s. certificate | 9560 KB | |
| Europe TUV Rheinland ATEX ec 3G | 678 KB | |
| Europe TUV Rheinland ATEX tc 3D | 862 KB | |
| United Kingdom CML UKEX Category I M2 UKEX Category II 2 G UKEX Category II 1 D UKEX Category II 1 G | 331 KB | |
| Worldwide PTB IECEx ia | LINK | --- |
| Worldwide TUV Rheinland IECEx ec | LINK | --- |
| Worldwide TUV Rheinland IECEx tc | LINK | --- |
| exida Functional Safety Assessment | 302 KB | |
| Control Drawings | ||
| Control drawing UL / Control drawing UL | 206 KB | |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 1339 KB | |
| UK Declaration of Conformity (P+F) | 1323 KB |
Produtos Relacionados: NJ5-18GK-SN
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
Os sensores indutivos VariKont com tecnologia Active Shielding garantem altas distâncias de comutação, independentemente da situação de instalação e do material circundante. Beneficie-se de um projeto de equipamento mais fácil e de custos reduzidos!
Como os sensores de segurança indutivos SIL 2/PL d não possuem banda morta, a transferência de dados pode ocorrer sem distância mínima entre o sensor e o alvo. Descubra o portfólio otimizado para ambientes exigentes.
Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
+55 11 4007 1448
A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.